What backpack webbing means to bags: It is the end of the year again, and a large-scale movement in history is about to begin, which is the Spring Festival travel. In this wave of people returning home, all kinds of bags and backpack webbing have become a beautiful landscape. What's the meaning of backpacking. Bags are widely used in our daily life, especially in the days of Spring Festival travel. What people carry on their backs, what they carry on their hands, and what they hang around their necks, regardless of where they appear, are the knapsack ribbons that are closely related to the human body. It can be said that it is of great significance. Can you imagine the sour and refreshing feeling brought by the sudden rupture of the bag belt when you are carrying a full case of luggage to board the train?
In the 1970s, due to the promotion of continuous ribbon dyeing and ironing machine, Liaoning Webbing Manufacturer From the traditional process of dyeing before weaving to the continuous process of weaving before dyeing, weaving before bleaching, ironing after treatment, the ribbon technology has entered the ranks of mechanized mass production. In the early 1980s, the industry introduced high-speed shuttleless loom, ironing machine, wrapping machine, warping machine, etc. from Switzerland, Italy and the Federal Republic of Germany, and the ribbon technology entered a new stage of development. The progress of webbing technology has brought about the upgrading of products. In 1980, customized Webbing Manufacturer The rubber ingot belt has the characteristics of soft, light, thin, firm, small elongation, small impact force, short and flat joints.
Under normal use, the general use time is about three years. After three years, because of natural wear, part of the pp webbing will be corroded and broken. But this is under normal use. If it is not used frequently, similar situations will not occur. The reason why most of them cannot be used for such a long time is because they are lost in advance rather than because of other external damage. Therefore, the advice of Xiaobian is not to worry too much about the service life of the PP webbing, but to pay attention to how to protect yourself from loss and trouble.
Indirect plate making method: the indirect film is first exposed, hardened with 1.2% H2O2, developed with warm water, and dried to make a strippable graphic negative. During plate making, the adhesive film surface of the graphic negative is closely attached to the stretched screen, the adhesive film is tightly attached to the wet screen by extrusion, the film base is removed, and the screen is dried by wind. Process flow: 1. Stretched wire mesh - degreasing - drying. 2 Indirect film - exposure - hardening - development - fitting - drying - revision - blocking. 3 Straight mixed plate making method: first, paste the photosensitive adhesive layer on the screen frame with water, alcohol or photosensitive adhesive, dry it with hot air, remove the substrate of the photosensitive film, and then print the plate. After developing, the screen plate is made.
