1564731507178336.png fifteen billion three hundred and four million seventy-three thousand eight hundred and sixty-nine

 Universal banner
Your current location: home page > Enterprise substation

contact us

Dandong Guangwei Textile Co., Ltd

Tel: 0415-2816665

Mobile: 15304073869 Manager Meng

Email: [email protected]    

Address: No. 1466-1, Jinshan Street, Yuanbao District, Dandong, Liaoning

Website: cmdvalve.cn

Jilin customized single and double layer belt manufacturer

2022-01-25
 Jilin customized single and double layer belt manufacturer

Jilin customized Single and double layer belt Flat screen printing. The printing mould is a polyester or nylon screen (pattern) fixed on a square frame with hollow patterns. The pattern on the pattern plate can pass through the color paste, and the mesh without pattern can be sealed with a polymer film. When printing, the pattern is pressed against the fabric, and the color paste is placed on the pattern. The scraper is used to repeatedly scrape and press the color paste to reach the fabric surface through the pattern. customized Single and double layer belt Flat screen printing has low production efficiency, but wide adaptability and flexible application, suitable for small batch and multi variety production. Water slurry printing of bag webbing.

 Jilin customized single and double layer belt manufacturer

Silk fabrics have high porosity, so they have good sound absorption, dust absorption and heat resistance. Therefore, in addition to making clothes, it can also be used for interior decoration, such as silk carpets, tapestries, curtains, wall coverings, etc. Decorating a room with silk ornaments can not only make the room spotless, but also keep the room quiet. Due to its hygroscopicity, moisture release performance, moisture retention, air absorption and porosity, it can also adjust the indoor temperature and humidity. Silk fiber has small thermal denaturation and is relatively heat-resistant. When it is heated to 100 ℃, it is only about 5-8% brittle, and the thermal variability of most synthetic fibers is 4-5 times greater than that of silk. The combustion temperature of silk is 300~400 ℃, which is a non combustible fiber, while the combustion temperature of synthetic fiber is 200~2600C, which is flammable and fusible. Therefore, using silk fiber as the raw material for interior decoration can not only play the role of sound absorption, dust absorption, heat preservation, but also play the role of flame retardant.

 Jilin customized single and double layer belt manufacturer

Here are some examples of the production process of radio lanyard, toy lanyard, flashlight lanyard and camera lanyard. 1. Wholesale of webbing: nylon, pp, polyester and high elastic cotton are generally used to make lanyards, and the general specifications are 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 16mm, 20mm and 25mm wide. 2. Accessories: general accessories include metal clasps, certificate clips, etc., and plastic ones include aircraft clasps, plug buckles, safety buckles, etc. 3. Assembly: first print, cut according to the specified size, add string, plastic buckle, glue or press metal sheet, and then package. After inspection, a lanyard can be shipped in this way.

 Jilin customized single and double layer belt manufacturer

The steps of printing. Many friends don't know how to do it. In fact, there are two methods. So the master of PP ribbon factory will let you know. Direct plate making method: the method of direct plate making is to first place the photosensitive film of the wrist plate base coated with photosensitive material face up on the working table, place the stretched wrist net frame flat on the film base, then put photosensitive paste in the screen frame and apply pressure coating with a soft scraper, remove the plastic film base after drying and filling, and attach the photosensitive film wrist screen for printing. After developing After drying, screen printing is made. Process flow: stretched screen - degreasing - drying - peeling substrate - exposure - development - drying - revision - blocking

 Jilin customized single and double layer belt manufacturer

The convex and concave convex fabrics are compact and delicate on the front, with strip or pattern convex patterns, and rough on the back, with long floating lines. Wool fabric: single side woolen fabric, with the pile side being the front side of the fabric. For double-sided fleece fabric, the front side shall be the smooth and tidy side. Observe the selvage of the fabric: if the selvage is smooth, the neat side is the front side of the fabric. For double-layer, multi-layer and multiple fabrics, if the warp and weft density of the front and the back is different, the front side has a larger density or the front side has better raw materials.

 Jilin customized single and double layer belt manufacturer

What backpack webbing means to bags: It is the end of the year again, and a large-scale movement in history is about to begin, which is the Spring Festival travel. In this wave of people returning home, all kinds of bags and backpack webbing have become a beautiful landscape. What's the meaning of backpacking. Bags are widely used in our daily life, especially in the days of Spring Festival travel. What people carry on their backs, what they carry on their hands, and what they hang around their necks, regardless of where they appear, are the knapsack ribbons that are closely related to the human body. It can be said that it is of great significance. Can you imagine the sour and refreshing feeling brought by the sudden rupture of the bag belt when you are carrying a full case of luggage to board the train?

Dandong Guangwei Textile Co., Ltd

fifteen billion three hundred and four million seventy-three thousand eight hundred and sixty-nine (Manager Meng)


Copyright © //cmdvalve.cn/ Dandong Guangwei Textile Co., Ltd
Professionally engaged in Welcome to inquire!
technical support: Service support:
  Guangwei Textile Mobile Network
  Mobile website


Online Message