What does Dandong Guangwei Textile Weaving Group explain? Generally speaking, chemical fiber is added to cotton, a kind of polyester material. The invention of polyester and cotton has promoted the great progress of human textile, and it also has many advantages. Polyester cotton increases the tenacity of pure cotton yarn, which is not easy to break, and has elasticity! Some advantages of pure cotton, such as hygroscopicity and moisture retention, are mainly aimed at garment accessories. Some are not important to the fabric, and some are even shortcomings; The advantages of polyester are exactly what the ribbon yarn needs.
Heihe River Clothing ribbon Causes of bleeding. Some customers will customize the printing special Clothing ribbon However, the color bleeding sometimes occurs when the PP fabric manufacturer prints the PP ribbon, so the manufacturer should pay attention to the reasons when printing. Only by understanding these reasons can we reduce the occurrence of various conditions in the future use Clothing ribbon wholesale What causes color bleeding when printing? There is dirt on the surface of the machine during printing. Cleaning up during production can reduce these problems.
The basic process flow of knitting is: bleaching and dyeing - weft rolling - weaving - off machine cutting - packaging. Since 1960, many technical innovations have been carried out on the knitting machine, mainly including the enlargement of peach plate diameter, the installation of an automatic stop device for breaking rubber bands, and the replacement of iron ingots with nylon ingots. The improvement of these equipment has increased the vehicle speed to 160~190 rpm, doubled the stand rate and greatly improved the product quality. In 1980, SD-81A and B rubber ingot belts were developed, which are soft, light, thin, firm, with small elongation, small impact force, short and flat joints. At the beginning of 1990, the trial production of car seat belts for Santana cars was successful. After more than two years of research and trial production, the product quality reached QC49-92 and TL-VW470 standards.
Indirect plate making method: the indirect film is first exposed, hardened with 1.2% H2O2, developed with warm water, and dried to make a strippable graphic negative. During plate making, the adhesive film surface of the graphic negative is closely attached to the stretched screen, the adhesive film is tightly attached to the wet screen by extrusion, the film base is removed, and the screen is dried by wind. Process flow: 1. Stretched wire mesh - degreasing - drying. 2 Indirect film - exposure - hardening - development - fitting - drying - revision - blocking. 3 Straight mixed plate making method: first, paste the photosensitive adhesive layer on the screen frame with water, alcohol or photosensitive adhesive, dry it with hot air, remove the substrate of the photosensitive film, and then print the plate. After developing, the screen plate is made.
